What is Coco Peat ?

Cocopeat is a natural fibre made out of coconut husks. The extraction of the coconut fibre from husks gives us this by-product called cocopeat. Cocopeat is a 100% natural growing medium. This cocopeat dried in the natural sun, are processed to produce different items namely cocopeat block, cocopeat briquettes, cocopeat tablets etc.
This makes an excellent growing medium for hydrophonics or container plant growing. Clean coir has natural rooting hormones and anti-fungal properties.

Benefits of the Coir (Cocopeat) as a growing media

Cocopeat is an organic material and its production is part of the many uses of the coco nut. When using Cocopeat for hydroponic
    growing the environment is not  harmed.

Cocopeat is an excellent substrate for root development and therefore transplanting can be made directly into the Cocopeat with
    no need for any further treatment or agent.

Unlike other soilless cultures, Coco holds high air capacity even when  completely saturated.

The drying duration of  Cocopeat is slower than many hydroponics mediums (not including Crush coir- cocopeat material), even though
    Cocopeat holds more air when completely saturated.

With time the Cocopeat develops a high buffer capacity that will enable the plants to overcome a short time deficiency of fertilizers and     water.

The ability to choose a different fraction or mix of Rajapathi International Cocopeat enables the grower to choose the most suitable
    growing media that will give the best results in a given climate.

Quality

Our team of quality controllers work with common procedures on all our production sites, checks are made throughout the manufacturing process right up to dispatch. To ensure production homogeneity each site has a laboratory that carries out regular tests throughout the production process. Our policy is to produce CocoPeat as per customer specification. We make every effort to deliver agreed quality and quantity to our customers on time. We commit ourselves to implement the Quality Management System and to continually seek improvements in the system's operation.
Analysis

pH    : 5.5 - 6.5
Electrical conductivity µS/cm : 250-500
Lignin (w/w dry basis %) : 65 - 70
Air filled porosity (v/v%) : 10 - 12
Cationic Exchange capacity (m.eq/100 g) : 60 - 130
Water holding capacity (of dry weight) : 7 - 8 times
Total organic matter (w/w dry basis %) : 94 - 98
Organic carbon (w/w basis %)  : 45 - 50
Total pore space (v/v %) : 94 - 96
Ash (dry basis %)  : 3 - 6
Carbon Nitrogen Ratio  : 80 :1
Cellulose (w/w dry basis %)  : 20 - 30
Appearance  : Earthen,Granular with  Short fibres
Colour  : Light to dark brown
Process


All our products are based on the same thing: coconut husks. By using a variety of processing methods, we produce three materials: coco peat, coco chips and coco fibre.



Coco peat

Once the husks have been received in our production plants they are stored centrally for at least six weeks, after which further processing can begin. The husks are beaten or decorticated to remove the fibres, which leaves us with coco peat. The coco peat is transported to our storage bunkers immediately after the fibres have been removed. There it is stored and so begins the ageing process in which the coco peat is stabilised. This process takes at least four months. Once it is over, we sieve the coco peat to remove the last remaining fibres. The coco peat is then dried and taken to the pressing shop, where it is compressed into 5kg blocks and briquettes. After this, the products are shipped in sea containers.

Washing

Raw material is washed properly with clean water and EC is checked at every level of washing. Even level of washing on the raw material is another important factor which is kept in mind during the process.
Washed material is sent for drying only after it confirms with all the required parameters set by the Quality Control Department. It is at this step that extreme care is taken to ensure that the quality is as per expectation.

Drying

The washed material is spread for drying in the cement yards. Moisture is tested at this stage to ensure it is below the required level and that the material will be suitable for compression after screening.Coco fibre

Compaction

The peat is compressed for bailing. This is accomplished by 5 kg block making machine and 650 gram briquette making machine. The product is frequently checked for buyer packing expectation. Packing The final product is packed as per customer's specifications as laid down in the order. While loading pallets, all precautionary measures are taken in consideration of container's tough and long journey in the seawater.